PiStorm68K v1.6 focuses on the power path. The revised N-channel switching arrangement aims to reduce voltage loss and keep the Raspberry Pi’s supply stable under load.
Read the story ↗
The Minimig AGA core boots on an Artix-7 development board with working audio and classic peripherals. This is an early demonstration of the direction proposed for AmiCube…
Read the story ↗
PiStorm68K lets a Minimig keep a physical 68000 and a Raspberry Pi accelerator installed together. This introduction demonstrates selecting the CPU path with an external switch and…
Read the story ↗
New joystick and PS/2 PMODs support the next round of AmiCube and Minimig AGA experiments. This development update connects the peripheral hardware with FPGA porting, memory plans…
Read the story ↗
A personal travel video from a visit to Shenzhen University with Rosalie. This mostly unedited walk offers a view of the campus and the surrounding high-tech city…
Read the story ↗
PiStorm68K v1.4 investigates unwanted power reaching logic through its signal connections. The update follows the component differences, protection changes and switching tests that informed the planned v1.5…
Read the story ↗
Follow PiStorm68K v1.2 through the workshop: stencil preparation, component placement, reflow, wave soldering and final programming. The video shows how an assembled adapter emerges from the PCB…
Read the story ↗
A comparison of PiStorm68K v1.2 and v1.3 centres on parasitic powering and the behaviour of latches versus D-type flip-flops. Status LEDs help expose the unwanted voltage, leading…
Read the story ↗
A short entry from the AmiCube AGA development archive, focused on Alice. It sits alongside the longer memory and chipset updates documenting the move beyond the original…
Read the story ↗
AmiCube v1.1 gains a larger memory plan: two 512-Mbit SDRAM devices provide 128 MiB alongside the existing 6 MiB SRAM. This update follows the PCB changes and…
Read the story ↗
The AmiCube v1.1 PCB review concentrates on details that make bring-up easier: level shifting, floppy signals, status indicators, power selection and FPGA decoupling.
Read the story ↗
The first floppy-interface tests on AmiCube v1 exercise both DF0 and DF1 connections with physical drives and a GoTek. The Spartan-6 prototype is being checked one interface…
Read the story ↗